Shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
B&C 10 MBX 64 8 LF Driver B&C 10mbx64-8
210,27 Add to cart

B&C 10 MBX 64 8 LF Driver B&C 10mbx64-8

210,27

Brand: B&C SPEAKERS
Article number: 10mbx64-8

  • 700 W continuous program power capacity
  • 64 mm (2.5 in) aluminium voice coil
  • 65 – 6000 Hz response
  • 100 dB sensitivity
  • Neodymium inside slug magnet assembly
  • Aluminium demodulating ring allows a very low distortion figure
  • Ventilated voice coil gap for reduced power compression

Brand: B&C SPEAKERS
Article number: 10mbx64-8

B&C 10 MBX 64 8 LF Driver

  • 700 W Continuous power handling
  • 2.5 in (64 mm) Voice coil diameter
  • Neodymium Inside Slug Magnet material

The MBX series mid-bass woofers from B&C Speakers offer acoustic designers a new range of high efficiency, wide bandwidth alternatives that are not currently available in the B&C range. These full-featured transducers incorporate lightweight neodymium motors, inside/outside wound copper clad aluminum wire voice coils, weatherproof impregnated paper cones, and a symmetrical inductance profile. The MBX Series is especially well suited for two-way loudspeaker enclosures.

Type of speaker 10″
Nominal Diameter mm 250 mm
Impedance Ohm 8 Ω
Power Handling 700 W
Frequency range 65 – 6000 Hz
Sensitivity dB 100.0
Magnet Material Neodymium Inside Slug
Brand B&C SPEAKERS
Type speaker
Nominal Diameter 250 mm (10.0 in)
Nominal Impedance 8 Ω
Minimum Impedance 6.5 Ω
Nominal Power Handling 350 W
Continuous Power Handling 700 W
Sensitivity 100.0 dB
Frequency Range 65 – 6000 Hz
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 12.0 mm (0.47 in)
Magnetic Gap Depth 8.0 mm (0.31 in)
Flux Density 1.25 T
Surround Shape Double Roll
Cone Shape Radial
Spider Single
Pole Design T-Pole
Woofer Cone Treatment Waterproof Impregnated Cone
Recommended Enclosure 26.0 dm3 (0.92 ft3)
Recommended Tuning 65 Hz
Resonance Frequency 65 Hz
Re 5.5 Ω
Qes 0.27
Qms 5.6
Qts 0.26
Vas 28.0 dm3 (0.99 ft3)
Sd 346.0 cm2 (53.63 in2)
η₀ 3.2 %
Xmax ± 4.0 mm
Xvar ± 5.5 mm
Mms 32.0 g
Bl 16.9 Txm
Le 0.39 mH
EBP 240 Hz
Overall Diameter 261 mm (10.28 in)
Bolt Circle Diameter 245 mm (9.65 in)
Baffle Cutout Diameter 230.0 mm (9.06 in)
Depth 125 mm (4.92 in)
Flange and Gasket Thickness 14 mm (0.55 in)
Air Volume Occupied by Driver 1.5 dm3 (0.05 ft3)
Net Weight 3.2 kg (7.05 lb)
Recone kit RCK10MBX648
Article B&C 10mbx64-8
  • Drawing
  • Datasheet

B&C SPEAKERS

Additional information

Weight 3,8 kg
Dimensions 175 × 295 × 314 cm
Type of speaker

Nominal Diameter mm

Impedance Ohm

Power Handling

Sensitivity (dB)

Magnet Material

Brand

Type

Nominal Diameter

250 mm (10.0 in)

Nominal impedance

Minimum Impedance

6.5 Ω

Nominal Power Handling

Continuous Power Handling

Sensitivity

100.0 dB

Frequency Range

65 – 6000 Hz

Winding Material

Former Material

Winding Depth

Magnetic Gap Depth

Flux Density

Surround Shape

Cone Shape

Spider

Pole Design

Woofer Cone Treatment

Resonance Frequency

Re

Qes

Qms

Qts

Vas

Sd

η₀

Xmax

Xvar

Mms

BL

Le

EBP

Overall diameter

Bolt circle diameter

Baffle cutout diameter

Depth

Flange and Gasket Thickness

Air Volume Occupied by Driver

Net weight

Recone kit

Article