Brand: B&C SPEAKERS
Article number: 15DS100-8
B&C 15 DS 100 8 LF Driver
- 3000 W Continuous power handling
- 4.0 in (100 mm) Voice coil diameter
- Neodymium Inside Slug Magnet material
This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is less heat, more energy in the gap, higher sensitivity, higher power handling, lower distortion and better overall performance. The 15DS100 features a 37mm long, 4 inch diameter (100mm) Copper Clad Aluminum Wire voice coil. With a 1500watt AES power rating, 96.8 dB sensitivity, and over 14.0mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range.
| Type of speaker | 15″ |
| Nominal Diameter mm | 380 mm |
| Impedance Ohm | 8 Ω |
| Power Handling | 3000 W |
| Frequency range | 39 – 1000 Hz |
| Sensitivity dB | 96.8 |
| Magnet Material | Neodymium Inside Slug |
| Brand | B&C SPEAKERS |
| Type | speaker |
| Nominal Diameter | 380 mm (15.0 in) |
| Nominal Impedance | 8 Ω |
| Minimum Impedance | 6.2 Ω |
| Nominal Power Handling | 1500 W |
| Continuous Power Handling | 3000 W |
| Sensitivity | 96.8 dB |
| Frequency Range | 39 – 1000 Hz |
| Winding Material | Aluminium |
| Former Material | Glass Fibre |
| Winding Depth | 37.0 mm (1.46 in) |
| Magnetic Gap Depth | 16.0 mm (0.63 in) |
| Flux Density | 0.7 T |
| Surround Shape | Triple Roll |
| Cone Shape | Radial |
| Spider | Double Silicone |
| Pole Design | T-Pole |
| Woofer Cone Treatment | TWP Waterproof Both Sides |
| Recommended Enclosure | 120.0 dm3 (4.24 ft3) |
| Recommended Tuning | 40 Hz |
| Resonance Frequency | 39 Hz |
| Re | 4.5 Ω |
| Qes | 0.27 |
| Qms | 7.75 |
| Qts | 0.26 |
| Vas | 76.0 dm3 (2.68 ft3) |
| Sd | 855.0 cm2 (132.53 in2) |
| η₀ | 1.77 % |
| Xmax | ± 14.5 mm |
| Xvar | ± 14.0 mm |
| Mms | 220.0 g |
| Bl | 30.68 Txm |
| Le | 4.6 mH |
| EBP | 144 Hz |
| Overall Diameter | 393 mm (15.47 in) |
| Bolt Circle Diameter | 374 mm (16.7 in) |
| Baffle Cutout Diameter | 353.0 mm (13.9 in) |
| Depth | 190 mm (7.5 in) |
| Flange and Gasket Thickness | 16 mm (0.63 in) |
| Air Volume Occupied by Driver | 6.0 dm3 (0.21 ft3) |
| Net Weight | 9.6 kg (21.16 lb) |
| Recone kit | RCK15DS1008 |
| Article | B&C 15DS100-8 |
- Drawing
- Datasheet
