Brand: B&C SPEAKERS
Article number: 15ds115-8
B&C 15 DS 115 8 LF Driver
- 3200 W Continuous power handling
- 4.5 in (116 mm) Voice coil diameter
- Neodymium Inside Slug Magnet material
This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, less heat, higher sensitivity, higher power handling, lower distortion and better overall performance. The 15DS115 features a 40mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1600watt AES power rating, 97 dB sensitivity, and over 14 mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range.
| Type of speaker | 15″ |
| Nominal Diameter mm | 380 mm |
| Impedance Ohm | 8 Ω |
| Power Handling | 3200 W |
| Frequency range | 35 – 1000 Hz |
| Sensitivity dB | 97.0 |
| Magnet Material | Neodymium Inside Slug |
| Brand | B&C SPEAKERS |
| Type | speaker |
| Nominal Diameter | 380 mm (15.0 in) |
| Nominal Impedance | 8 Ω |
| Minimum Impedance | 7.2 Ω |
| Nominal Power Handling | 1600 W |
| Continuous Power Handling | 3200 W |
| Sensitivity | 97.0 dB |
| Frequency Range | 35 – 1000 Hz |
| Winding Material | Aluminium |
| Former Material | Glass Fibre |
| Winding Depth | 40.0 mm (1.57 in) |
| Magnetic Gap Depth | 14.0 mm (0.55 in) |
| Flux Density | 0.8 T |
| Surround Shape | Triple Roll |
| Cone Shape | Radial |
| Spider | Double Silicone |
| Pole Design | T-Pole |
| Woofer Cone Treatment | TWP Waterproof Both Sides |
| Recommended Enclosure | 80.0 dm3 (2.83 ft3) |
| Recommended Tuning | 40 Hz |
| Resonance Frequency | 33 Hz |
| Re | 4.9 Ω |
| Qes | 0.18 |
| Qms | 5.2 |
| Qts | 0.17 |
| Vas | 94.0 dm3 (3.32 ft3) |
| Sd | 855.0 cm2 (132.53 in2) |
| η₀ | 1.9 % |
| Xmax | ± 16.5 mm |
| Xvar | ± 14.0 mm |
| Mms | 254.0 g |
| Bl | 38.7 Txm |
| Le | 4.5 mH |
| EBP | 183 Hz |
| Overall Diameter | 393 mm (15.47 in) |
| Bolt Circle Diameter | 375 mm (14.76 in) |
| Baffle Cutout Diameter | 354.0 mm (13.94 in) |
| Depth | 199 mm (7.83 in) |
| Flange and Gasket Thickness | 15 mm (0.59 in) |
| Air Volume Occupied by Driver | 7.0 dm3 (0.25 ft3) |
| Net Weight | 11.6 kg (25.57 lb) |
| Recone kit | RCK15DS1158 |
| Article | B&C 15ds115-8 |
- Drawing
- Datasheet
