Shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
B&C 6 MBX 44 16 LF Driver B&C 6mbx44-16
149,96 Add to cart

B&C 6 MBX 44 16 LF Driver B&C 6mbx44-16

149,96

Brand: B&C SPEAKERS
Article number: 6mbx44-16

  • 400 W continuous program power capacity
  • 44 mm (1.7 in) aluminium voice coil
  • 115 – 5000 Hz response
  • 98 dB sensitivity
  • Neodymium magnet allows a very light yet powerful motor assembly
  • Aluminium ring allows a very low distortion figure

Brand: B&C SPEAKERS
Article number: 6mbx44-16

B&C 6 MBX 44 16 LF Driver

  • 400 W Continuous power handling
  • 1.7 in (44 mm) Voice coil diameter
  • Neodymium Ring Magnet material

The MBX series mid-bass woofers from B&C Speakers offer acoustic designers a new range of high efficiency, wide bandwidth alternatives that are not currently available in the B&C range. These full-featured transducers incorporate lightweight neodymium motors, inside/outside wound copper clad aluminum wire voice coils, weatherproof impregnated paper cones, and a symmetrical inductance profile. The MBX Series is especially well suited for two-way loudspeaker enclosures.

Type of speaker 7″
Nominal Diameter mm 170 mm
Impedance Ohm 16 Ω
Power Handling 400 W
Frequency range 115 – 5000 Hz
Sensitivity dB 98.0
Magnet Material Neodymium Ring
Brand B&C SPEAKERS
Type speaker
Nominal Diameter 170 mm (6.5 in)
Nominal Impedance 16 Ω
Minimum Impedance 11.9 Ω
Nominal Power Handling 200 W
Continuous Power Handling 400 W
Sensitivity 98.0 dB
Frequency Range 115 – 5000 Hz
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 10.0 mm (0.37 in)
Magnetic Gap Depth 6.0 mm (0.25 in)
Flux Density 1.55 T
Surround Shape Triple Roll
Cone Shape Exponential
Spider Single
Pole Design T-Pole
Woofer Cone Treatment Waterproof Impregnated Cone
Recommended Enclosure 3.0 dm3 (0.11 ft3)
Recommended Tuning 120 Hz
Resonance Frequency 115 Hz
Re 10.4 Ω
Qes 0.41
Qms 2.9
Qts 0.35
Vas 4.0 dm3 (0.14 ft3)
Sd 132.0 cm2 (20.46 in2)
η₀ 1.4 %
Xmax ± 3.5 mm
Xvar ± 3.0 mm
Mms 12.0 g
Bl 14.7 Txm
Le 0.34 mH
EBP 280 Hz
Overall Diameter 187 mm (7.36 in)
Bolt Circle Diameter 172 mm (6.7 in)
Baffle Cutout Diameter 145.0 mm (5.7 in)
Depth 87 mm (3.43 in)
Flange and Gasket Thickness 11 mm (0.4 in)
Air Volume Occupied by Driver 0.6 dm3 (0.02 ft3)
Net Weight 1.5 kg (3.31 lb)
Recone kit RCK06MBX4416
Article B&C 6mbx44-16
  • Drawing
  • Datasheet

B&C SPEAKERS

Additional information

Weight 1,75 kg
Dimensions 130 × 221 × 214 cm
Type of speaker

Nominal Diameter mm

Impedance Ohm

Power Handling

Sensitivity (dB)

Magnet Material

Brand

Type

Nominal Diameter

170 mm (6.5 in)

Nominal impedance

Minimum Impedance

11.9 Ω

Nominal Power Handling

Continuous Power Handling

Sensitivity

98.0 dB

Frequency Range

115 – 5000 Hz

Winding Material

Former Material

Winding Depth

Magnetic Gap Depth

Flux Density

Surround Shape

Cone Shape

Spider

Pole Design

Woofer Cone Treatment

Resonance Frequency

Re

Qes

Qms

Qts

Vas

Sd

η₀

Xmax

Xvar

Mms

BL

Le

EBP

Overall diameter

Bolt circle diameter

Baffle cutout diameter

Depth

Flange and Gasket Thickness

Air Volume Occupied by Driver

Net weight

Recone kit

Article