- 600 Watt continuous program power handling Mid-Bass
- 2.5-inch , fibreglass outside, aluminum voice coil
- 99 dB Sensitivity
- 65 Hz – 3.5 kHz Frequency range
- Dual-forced air ventilation for minimum power compression
- M -roll surround and exponential cone geometry
- Demodulation ring
- 100 Watt Continuous program power handling HF
- 1.75-inch Diaphragm, 1.0-inch Exit Throat
- Frequency range: 1200Hz â 20kHz
The CX10N251 is a lightweight coaxial driver with excellent linearity and high efficiency. The CX10N251 radiates a coherent single spherical wave front with perfect dispersion control. The design is powered from a large sized single neodymium ring magnet that provides an extremely high flux density and BL factor. The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket. A 2,5” voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension. The 1,7” dome compression driver, loaded to a 60° conical waveguide, provides a clear vocal output and a perfect high frequency extension.
- General specifications
- Nominal Diameter: 10 inch / 254 mm
- Related Impedance (Ohm): 8.00 ohm
- Program Power (Watt): 600 W
- Power handling capacity (Watt): 300 W
- Sensitivity (dB): 99.0 dB
- Frequency range: 65 – 3500 Hz
- Effective piston diameter: 210 mm / 8.27 inch
- Max. Excursion Before Damage: 30 mm / 1.18 inch
- Minimim Impedance (Ohm): 6.4 ohm
- Voice Coil Diameter: 2.5 inch / 63 mm
- Voice Coil Material: Aluminium
- Voice Coil Winding Depth: 0.55 inch / 14 mm
- Number of layers: 1
- Kind of layers: outside
- Top Plate Thickness: 8 mm / 0.31 inch
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: M-roll
- Magnets: Neodymium
- Dual-force air ventilation: Yes
- Demodulation Rings material: Aluminium
- Spider: Single
- Thiele – small parameters
- Resonance frequency (Fs) (Hz): 72 Hz
- DC resistance (Re) (Ohm): 5.20 ohm
- Mechanical factor (Qms): 4.50 Qms
- Electrical factor (Qes): 0.25 Qes
- Total factor (Qts): 0.23 Qts
- BL factor (BL) (T x m): 17.50 T x m
- Effective moving mass (Mms) (gr): 28.0 g
- Equivalent Cas air loaded (Vas) (liters): 25.0 liters
- Effettive piston area (Sd) (m2): 0.040 m2
- Max. linear excursion (Xmax) (mm): 5.0 mm
- Voice coil inductance @ 1kHz (Le1k) (mH): 1.20 mH
- Half-space efficency (Eff) (%): 4.70%
- General specifications driver
- Diaphragm Material: Polymide
- Exit Throat Diameter: 1.0 inch / 25 mm
- Flux Density (T): 1.9 T
- Frequency range: 1200 – 20000 Hz
- Kind of layers: outside
- Magnetics: Neodymium
- Minimim Impedance (Ohm): 6.50 ohm
- Number of layers: 1.00
- Phase Plug Design: 2 slot
- Phase Plug Material: PP Composite
- Power handling capacity (Watt): 50 W
- Program Power (Watt): 100 W
- Related Impedance (Ohm): 8.00 ohm
- Sensitivity (dB): 109 dB
- Suspension Design: Flat
- Suspension Material: Polymide
- Voice Coil Diameter: 1.75 inch / 44 mm
- Voice Coil Material: Edgewound Aluminium
- General specifications horn
- Throat Diameter: 25 mm / 1 inch
- Horizontal coverage angle (°): 60°
- Vertical coverage angle (°): 60°
- Cut-off Frequency (Hz): 1800 Hz
- Material: Structural Polyurethane
- Mounting Information
- Overall diameter: 260 mm / 10.24 inches
- Bolt circle diameter: 241-246 mm / 9.49-9.69 inch
- Bolt hole diameter: 6 mm / 0.24 inch
- Front mount baffle cut-out: 234 mm / 9.21 inch
- Rear mount baffle cut-out: 234 mm / 9.21 inch
- Volume occupied by the driver: 2.1 liters / 0.08 ft3
- Standard compliance
- CE marking: Yes
- Size
- Diameter: 260 mm / 10.24 inches
- Height: 136 mm / 5.35 inches
- Weight: 3.29 kg / 7.25 lbs
- Shipping informations
- Package Depth: 294 mm / 11.57 inches
- Package Height: 199 mm / 7.83 inches
- Package Weight: 4.07 kg / 8.97 lbs
- Package Width: 279 mm / 10.98 inches
