- 3-inch, fibreglass inside/outside aluminium voice coil
- 1000W continuous program power handling
- 97.5 dB Sensitivity
- 55 Hz – 3.5 kHz Frequency range
- Dual-forced air ventilation for minimum power compression
- M-roll surround and exponential cone geometry
The MB10N305 is a hypervented neo, high linearity mid-bass. The magnetic structure is powered by a large neodymium magnet that provides an extremely high flux density in the gap. The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special airforced ventilations are provided for voice coil, magnet assembly and basket. M-roll surround and spider design offer great linearity and precise reproduction.
- General specifications
- Nominal Diameter: 10 inch / 254 mm
- Rated Impedance: 8 ohm
- Program Power: 1000 W
- Power handling capacity: 500 W
- Sensitivity: 97.5 dB
- Frequency range: 55 – 3500 Hz
- Effective piston diameter: 210 mm / 8.27 inch
- Max. Excursion Before Damage: 34 mm / 1.34 inch
- Minimim Impedance: 6.9 ohm
- Voice Coil Diameter: 3.0 inch / 76 mm
- Voice Coil Winding Material: Aluminium
- Voice Coil Length: 14 mm / 0.55 inch
- Number of layers: 1
- Kind of layers: inside/outside
- Top Plate Thickness: 10 mm / 0.39 inch
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: M-roll
- Magnets: Neodymium
- Hypervented magnetic structure: Yes
- Spider: Single
- Thiele – small parameters
- Resonance frequency (Fs): 60 Hz
- DC resistance (Re): 5.60 ohm
- Mechanical factor: 4.00 Qms
- Electrical factor (Qes): 0.24 Qes
- Total factor: 0.23 Qts
- BL factor (BL): 18.50 T x m
- Effective moving mass (Mms): 37.0 g
- Equivalent Cas air loaded (Vas): 31.0 liters
- Effettive piston area (Sd): 0.040 m2
- Max. linear excursion (Xmax): 5.0 mm
- Voice coil inductance @ 1kHz (Le1k): 0.90 mH
- Half-space efficency (Eff): 2.90%
- Mounting Information
- Overall diameter: 260 mm / 10.24 inches
- Bolt circle diameter: 241-246 mm / 9.49-9.69 inch
- Bolt hole diameter: 6 mm / 0.24 inch
- Front mount baffle cut-out: 234 mm / 9.21 inch
- Rear mount baffle cut-out: 234 mm / 9.21 inch
- Volume occupied by the driver: 1.4 liters / 0.06 ft3
- Standard compliance
- CE marking: Yes
- Size
- Weight: 3.2 kg / 7.05 lbs
- Height: 126 mm / 4.96 inches
- Diameter: 260 mm / 10.24 inches
- Shipping informations
- Package Width: 289 mm / 11.38 inches
- Package Weight: 3.8 kg / 8.38 lbs
- Package Height: 169 mm / 6.65 inches
- Package Depth: 289 mm / 11.38 inches
