Shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
RCF AUDIO MATRIX. MZ 8060
1.268,75 Add to cart

RCF AUDIO MATRIX. MZ 8060

1.268,75

Brand: RCF
Article number: MZ 8060

  • 40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB.
  • 8 universal inputs (48V), 6 outputs – 4 Euroblocks bal., 2 RCA plugs
  • 10 programmable logic inputs (GPI), 6 programmable logic outputs (GPO), 2 of which supported by relay.
  • Configurable parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations, filters
  • 40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB.
  • 8 universal inputs (48V), 6 outputs – 4 Euroblocks bal., 2 RCA plugs
  • 10 programmable logic inputs (GPI), 6 programmable logic outputs (GPO), 2 of which supported by relay.
  • Configurable parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations, filters
  • Each unit can work as dual-room combiner with independent auto-mixer facility for each room
  • Configurable ALC (Automatic Level Control) facility by using Input 8 to connect a noise detection microphone. The control is then assignable to any output or group of outputs
  • USB connectivity for device configuration
  • RDNet Networked Control
MZ 8060 is a highly versatile digital audio matrix designed on a powerful DSP platform, based on advanced electronics. It features a 8×6 matrix, where 8 universal MIC-LINE inputs and 6 outputs can be processed through a large number of audio parameters, such as parametric equalizers, compressors, gates, limiters, delays, duckers, priorities, auto-mixer. The Automatic Level Control facility is also available, a probe can be connected on input 8, in order to automatically adjust the volume level according to the environmental noise measured. MZ 8060 is able to receive 10 logic inputs (GPI) and send 6 logic outputs (GPO), assignable. 2 of these outputs are operated by a relay. A serial port can be set to control the unit from a third party system (e.g. Crestron and AMX). Moreover, it is possible to link two MZ 8060 (in master-slave configuration) to create a 16-input 12-output matrix. A slot on the rear panel allows the integration of an optional RCF RDNet module, to access MZ 8060 through an RDNet control network. Up to 12 paging consoles BM 3003 can be daisy-chained to the dedicated RJ 45 input, alternative on input 1. The front panel integrates several LED indicators to allow the supervision of the audio input and output activities. A dedicated PC Control Software, embedded into RDNet environment is available for unit setup and control: if the optional RDNet module is not installed, a standard USB connector is located on the front panel. It is suitable for 19’’ rack mounting (1U). MZ 8060 uses a 50W power supply, 100-240VAC, 50/60Hz.

RCF RDNet

NETWORKED CONTROL AND MUCH MORE RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.

TOUCH CONTROL PANEL

The RCF TS 9918 touch sensitive remote control provides flexible external control of several functions. All the buttons and the scroll-wheel are fully configurable using the PC Control Software and the slim-line structure allows installation in any environment. Three backlight operation modes are available according to the application: night, eco, and daylight

ELECTRONICS

The MZ 8060 is based on a modern 40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, with over 112 dB of dynamic range. The DSP is capable of an extensive range of processing: parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations and crossover filters.

  • Audio performance
    • Distortion (THD+N) @ 1 kHz nominal power:
    • Dynamic range: >114 dB
    • Frequency Response (-3dB): 20 Hz ÷ 20 kHz

  • Digital audio performance
    • A/D – D/A converters (bit): 24
    • Sampling rate (kHz): 48

  • Input section
    • Total number of inputs: 9
    • Balanced: 9
    • Mono: 9
    • Mic+Line inputs: 8
    • Mic+Line connectors: Euroblock, RCA
    • Mic+Line Phantom: 48 V DC
    • Paging inputs: 1
    • Paging connectors: RJ45
    • Paging command: Contact

  • Output section
    • Signal output number: 6
    • Signal output connectors: Euroblock, RCA
    • General Purpose Outputs (GPO): 10
    • Programmable GPO: Yes

  • Processing
    • DSP: Yes
    • EQ Filters: Yes
    • Compressors: Yes
    • Automatic Gain Control (ACG): Yes

  • Controls
    • Configuration: PC Software
    • Number of programs/presets: 16
    • Priority: Yes
    • Protocols for system integration: ASCII

  • Protections
    • Cooling: Convection
    • Fuses: Yes

  • Power requirement
    • Operating voltage: 90-240 V~ 50/60HzV ~ Hz
    • Power consumption (W): 60 W

  • Standard compliance
    • CE marking: Yes

  • Physical specifications
    • Cabinet/Case Material: Metal
    • Rack mounting: 19″, 1U

  • Size
    • Depth: 320 mm / 12.6 inches
    • Height: 44 mm / 1.73 inches
    • Weight: 4.5 kg / 9.92 lbs
    • Width: 482 mm / 18.98 inches

  • Shipping informations
    • Package Depth: 480 mm / 18.9 inches
    • Package Height: 170 mm / 6.69 inches
    • Package Weight: 5 kg / 11.02 lbs
    • Package Width: 575 mm / 22.64 inches

Additional information

Weight5 kg
Dimensions480 × 575 × 170 cm
Brand

Dynamic Range

Frequency Response (-3dB)

A/D - D/A converters (bit)

Sampling rate (kHz)

Total number of inputs

Balanced

Mono

Mic+Line inputs

Mic+Line connectors

Mic+Line Phantom

Paging inputs

Paging connectors

Paging command

Signal output number

Signal output connectors

General Purpose Outputs (GPO)

Programmable GPO

DSP

EQ Filters

Compressors

Automatic Gain Control (ACG)

Configuration

Number of programs/presets

Priority

Cooling

Fuses

Operating voltage

Power consumption (W)

CE marking

Cabinet/Case Material

Rack mounting

Depth

Height

Weight

Width

Package Depth

Package Height

Package Weight

Package Width