Shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
RCF ACTIVE HIGH POWER SUBWOOFER. SUB 9004-AS
2.842,00 Add to cart

RCF ACTIVE HIGH POWER SUBWOOFER. SUB 9004-AS

2.842,00

Brand: RCF
Article number: SUB 9004-AS

  • 2800 W power rating
  • 136 dB SPL Max
  • RDNet remote monitoring and control
  • 1 x 18″ Hyper Ventilation Neodymium Subwoofer
  • 2800 W power rating
  • 136 dB SPL Max
  • 30 – 400 Hz Frequency Range
  • 1 x 18″ Hyper Ventilation Neodymium Subwoofer
  • DSP Controlled Input Section with selectable presets
  • RDNet remote monitoring and control
  • Delay Control
  • Baltic Birch Cabinet
The SUB 9004-AS is a single 18” high power active subwoofer. It employs a state of the art transducer featuring a hypervented high power neodymium magnetic circuit with 4” voice coil. The extremely high power amplifier is a new design that delivers extended low frequency performance. Due to its rugged construction it is perfect for AV rental inventories.

RCF RDNet

NETWORKED CONTROL AND MUCH MORE RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.

TOP END ELECTRONICS

The amplifier integrates a low-noise 32-bit DSP circuit, controlled through the RCF proprietary RDNet network to easily handle the soft clipping limiters, RMS limits, polarity, amplitude, timing and equalisation. All the settings, monitoring and advanced features are available inside the RDNet Networked Management software. The available control panel on the back adjusts input sensitivity, Low Cut, Xover, volume, bypass, delay and presets selection. The regulated power supply guarantees full power from 100 V to 260 V. The amplifier houses on a unique Vibrostop floating aluminium panel for extra protection during transportation.

HYPER VENTILATION SYSTEM

RCF manufactures these components to deliver the cleanest, punchiest, and undistorted low frequencies reproduction. The cone is composed of 30% carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency. The 4.0″ inside/outside voice coil is wounded on a strong fibreglass former and guarantees a more efficient cooling. The former is internally and externally reinforced with Nomex that stiffen the overall structure for a better energy transfer between the voice coil and the body cone. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed the unique Hyper Ventilation system with very low power compression. The cone is water resistant.

CABINET

The cabinet is made of high-quality birch plywood with weatherproof treatment. The subs are stackable and lightweight, for an easy set-up and tear down. A pole receptacle on the top and side allows the woofer to be used in various configurations. The heavy-duty coating and the rugged structure of the cabinet withstand long-term use and transportation and the separate housing for the amplifier guarantees component efficiency and reliability. Transportation is fast thanks to the detachable Kart kit, a dolly caster-board with rugged tour grade casters and rotating cam mechanism.

SUBWOOFER ALIGNMENT TUTORIALS

  • Acoustical specifications
    • Frequency Response: 30 Hz ÷ 400 Hz
    • Max SPL @ 1m: 136 dB

  • Transducers
    • Woofer: 18” neo, 4.0” v.c

  • Input/Output section
    • Input signal: bal/unbal
    • Input connectors: XLR, RDNet Ethercon
    • Output connectors: XLR, RDNet Ethercon
    • Input sensitivity: +4 dBu

  • Processor section
    • Hi-Pass Frequencies: 35 Hz, 50 Hz
    • Low-Pass Frequencies: Variable from 50 Hz to 400 Hz
    • Protections: Thermal, RMS
    • Limiter: Fast Limiter
    • Controls: Gain, Eq., Preset Switch, Output Delay
    • RDNet: Yes

  • Power section
    • Total Power: 2800 W Peak, 1400 W RMS
    • Cooling: Forced
    • Connections: Powercon IN/OUT

  • Standard compliance
    • CE marking: Yes

  • Physical specifications
    • Cabinet/Case Material: Baltic birch plywood
    • Hardware: 2xM20
    • Handles: 2 Side
    • Grille: Steel
    • Color: Black

  • Size
    • Height: 700 mm / 27.56 inches
    • Width: 558 mm / 21.97 inches
    • Depth: 700 mm / 27.56 inches
    • Weight: 57 kg / 125.66 lbs

  • Shipping informations
    • Package Height: 770 mm / 30.31 inches
    • Package Width: 770 mm / 30.31 inches
    • Package Depth: 630 mm / 24.8 inches
    • Package Weight: 61.8 kg / 136.25 lbs

Additional information

Weight61,8 kg
Dimensions630 × 770 × 770 cm
Brand

Frequency Response

Max SPL @ 1m

Woofer

Input signal

Input connectors

Output connectors

Input sensitivity

Hi-Pass Frequencies

Low-Pass Frequencies

Protections

Limiter

Controls

RDNet

Total Power

Cooling

Connections

CE marking

Cabinet/Case Material

Hardware

Handles

Grille

Color

Height

Width

Depth

Weight

Package Height

Package Width

Package Depth

Package Weight