Shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
RCF MID-BASS. L10-750YK
RCF MID-BASS. L10-750YK
€170,52
Brand: RCF
Article number: L10-750YK
-
3-inch, fiberglass inside/outside copper voice coil
-
700W continuous program power handling
-
100 dB Sensitivity
-
70 Hz – 3 kHz Frequency range
- 3-inch, fiberglass inside/outside copper voice coil
- 700W continuous program power handling
- 100 dB Sensitivity
- 70 Hz – 3 kHz Frequency range
- Shaped M-roll damped surround
The L10-750YK is a professional mid-bass woofer featuring very high output and dynamics. The mobile equipment, used a 3″ coil, fiberglass former and copper wire winding, has enable considerable improvement in transient peak response and has allowed good extension on mid-high frequencies. A specially designed M-roll surround guarantee a very low midrange distortion and perfect damping of the spurious resonances.
- General specifications
- Nominal Diameter: 10 inch / 254 mm
- Rated Impedance: 8 ohm
- Program Power: 700 W
- Power handling capacity: 350 W
- Sensitivity: 100.0 dB
- Frequency range: 70 – 3000 Hz
- Effective piston diameter: 210 mm / 8.27 inch
- Max. Excursion Before Damage: 40 mm / 1.57 inch
- Minimim Impedance: 7.0 ohm
- Voice Coil Diameter: 3.0 inch / 76 mm
- Voice Coil Winding Material: Copper
- Voice Coil Length: 9 mm / 0.35 inch
- Number of layers: 2
- Kind of layers: inside/outside
- Top Plate Thickness: 9 mm / 0.35 inch
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: M-roll
- Magnets: Ceramic
-
Spider: Single
- Thiele – small parameters
- Resonance frequency (Fs): 68 Hz
- DC resistance (Re): 5.10 ohm
- Mechanical factor: 4.20 Qms
- Electrical factor (Qes): 0.25 Qes
- Total factor: 0.24 Qts
- BL factor (BL): 17.50 T x m
- Effective moving mass (Mms): 36.0 g
- Equivalent Cas air loaded (Vas): 26.0 liters
- Effettive piston area (Sd): 0.040 m2
- Max. linear excursion (Xmax): 3.0 mm
- Voice coil inductance @ 1kHz (Le1k): 0.50 mH
-
Half-space efficency (Eff): 3.15%
- Mounting Information
- Overall diameter: 260 mm / 10.24 inches
- Bolt circle diameter: 242-247 mm / 9.53-9.72 inch
- Bolt hole diameter: 6 mm / 0.24 inch
- Front mount baffle cut-out: 230 mm / 9.06 inch
- Rear mount baffle cut-out: 229 mm / 9.02 inch
-
Volume occupied by the driver: 1.2 liters / 0.05 ft3
- Standard compliance
- Size
- Weight: 7 kg / 15.43 lbs
- Height: 117 mm / 4.61 inches
-
Diameter: 260 mm / 10.24 inches
- Shipping informations
- Package Width: 290 mm / 11.42 inches
- Package Weight: 7.9 kg / 17.42 lbs
- Package Height: 185 mm / 7.28 inches
-
Package Depth: 285 mm / 11.22 inches