- 4-inch, fiberglass inside/outside copper voice coil
- 3000W continuous program power handling
- 97.5 dB Sensitivity
- 25 Hz – 1 kHz Frequency range
- Dual Forced Hyperventing System
- Dual spider design with silicon based dampening control
- Triple-roll surround and corrugated straight cone geometry
Very linear frequency response characteristics, extreme high power handling while generating the lowest harmonic distortion of any comparable 18-inch transducer within its application range. The LF18X401 uses a fibre loaded cone assembly along with a high excursion triple roll surround. This combination provides remarkable strength and a peak to peak maximum excursion of 50 mm. The new dual forced hyper-venting system guarantee a very efficient voice coil ventilation for minimum power compression and incredible power handling.
- General specifications
- Nominal Diameter: 18 inch / 457 mm
- Rated Impedance: 8 ohm
- Program Power: 3000 W
- Power handling capacity: 1500 W
- Sensitivity: 97.5 dB
- Frequency range: 25 – 1000 Hz
- Effective piston diameter: 395 mm / 15.55 inch
- Max. Excursion Before Damage: 50 mm / 1.97 inch
- Minimim Impedance: 6.5 ohm
- Voice Coil Diameter: 4.0 inch / 102 mm
- Voice Coil Winding Material: Copper
- Voice Coil Length: 30 mm / 1.18 inch
- Number of layers: 2
- Kind of layers: inside/outside
- Top Plate Thickness: 15 mm / 0.59 inch
- Cone Design: Straight
- Surround Material: Polycotton
- Surround Design: Triple roll
- Magnets: Ceramic
- Dual-force air ventilation: Yes
- Spider: Dual with silicon based damping control
- Thiele – small parameters
- Resonance frequency (Fs): 30 Hz
- DC resistance (Re): 5.40 ohm
- Mechanical factor: 7.40 Qms
- Electrical factor (Qes): 0.31 Qes
- Total factor: 0.30 Qts
- BL factor (BL): 26.50 T x m
- Effective moving mass (Mms): 215.0 g
- Equivalent Cas air loaded (Vas): 274.0 liters
- Effettive piston area (Sd): 0.120 m2
- Max. linear excursion (Xmax): 12.0 mm
- Voice coil inductance @ 1kHz (Le1k): 0.83 mH
- Half-space efficency (Eff): 2.30%
- Mounting Information
- Overall diameter: 465 mm / 18.31 inches
- Bolt circle diameter: 442-447 mm / 17.4-17.6 inch
- Bolt hole diameter: 7 mm / 0.28 inch
- Front mount baffle cut-out: 424 mm / 16.69 inch
- Rear mount baffle cut-out: 425 mm / 16.73 inch
- Volume occupied by the driver: 6.5 liters / 0.26 ft3
- Standard compliance
- CE marking: Yes
- Size
- Weight: 12.5 kg / 27.56 lbs
- Height: 196 mm / 7.72 inches
- Diameter: 465 mm / 18.31 inches
- Shipping informations
- Package Width: 524 mm / 20.63 inches
- Package Weight: 15 kg / 33.07 lbs
- Package Height: 254 mm / 10 inches
- Package Depth: 494 mm / 19.45 inches
